Page 1 of 1

SchoolBoard ][ with Raspberry Pi FAQ

PostPosted: Wed Sep 17, 2014 8:47 am
by mikronauts
This forum is for discussing using SchoolBoard ][ with a Raspberry Pi.

SchoolBoard ][ provides:

- eight LED's with current limiting resistors
- eight tactile push buttons with current limiting resistors
- eight single pole single throw dip switch with current limiting resistors
- designed for 3.3V and 5V operation

For mode information on SchoolBoard ][ please see its product page:

http://www.mikronauts.com/proto/schoolboard/

Image