I decided to make my own advanced servo tester after finding it awkward to calibrate all 18 servos on my HexPi hexapod robot.
“The Better MouseTrap Servo Tester” is based on:
- RoboPi advanced controller board
- four thumb joystick modules
- R/C battery pack for providing power to the servos
- Styrene base to mount everything on
- assorted wires, mounting hardware, etc
For more information about "The Better Mousetrap Servo Tester", see its project blog at:
http://www.mikronauts.com/the-better-mo ... vo-tester/
For more information about HexPi, see my hexapod project blog at:
http://www.mikronauts.com/robot-zoo/hex ... -pi-robot/
For more information about RoboPi, please see its product page at:
http://www.mikronauts.com/raspberry-pi/robopi/
![Image](http://www.mikronauts.com/wp-content/upload/2014/05/servo_power_dip_0591.jpg)