Will the PiDA digital input work with my wheel encoders, which use Hamamatsu P5586 running at 5v, with a 6.8k pull-up resistor to 5v on the encoder output?
http://www.junun.org/MarkIII/datasheets/P5587.pdf
Alan
Moderator: Steve
alanmcdonley wrote:Will the PiDA digital input work with my wheel encoders, which use Hamamatsu P5586 running at 5v, with a 6.8k pull-up resistor to 5v on the encoder output?
http://www.junun.org/MarkIII/datasheets/P5587.pdf
Alan
mikronauts wrote:How many pulses per second (maximum) from your encoders?
alanmcdonley wrote:mikronauts wrote:How many pulses per second (maximum) from your encoders?
The wheels have 66 stripes and and max speed seems to be around 60 stripes per second at a blazing 2/3 fps.
mikronauts wrote:
The DIO pins will handle that fine. ... read the interrupt register on it at least 100 times per second
alanmcdonley wrote:mikronauts wrote:
The DIO pins will handle that fine. ... read the interrupt register on it at least 100 times per second
No way to interrupt Pi through the Droid Alpha with the encoder ticks?
(I'm not asking how it is done, only that it can be done with the Droid Alpha.)
Alan
p.s forgot to mention call sign WB0ZJJ in my introduction
Users browsing this forum: No registered users and 12 guests