Input Compatibility? Hamamatsu P5587 w/ 6.8k pull-up to 5v
Posted: Thu Jul 30, 2015 4:36 am
Will the PiDA digital input work with my wheel encoders, which use Hamamatsu P5586 running at 5v, with a 6.8k pull-up resistor to 5v on the encoder output?
http://www.junun.org/MarkIII/datasheets/P5587.pdf
Alan
http://www.junun.org/MarkIII/datasheets/P5587.pdf
Alan