[b]This forum is for discussing using Mikronauts Pi Jumper and Pi Jumper Plus with the Raspberry Pi.[/b]
Pi Jumper features:
- 2x13 pin stacking header (not available with Pi Jumper Plus)
- On-board voltage regulation providing 3.3V from the 5V on the Pi header
- LED power indicator
- four pin 3.3V I2C expansion header
- four pin 5V I2C expansion header with voltage translation
- 20 pin male header, and 20 pin round female header
- three screw terminals for 5V / 3v3 / GND
Pi Jumper Plus features
- 26 pin IDC cable so you can plug Pi Jumper into a breadboard
- 2x13 standard female header (instead of stacking header supplied with Pi Jumper)
Please see the Pi Jumper product page for details at:
http://www.mikronauts.com/raspberry-pi/pi-jumper/
Pi Jumper:
Pi Jumper Plus: